Slag Car Material Height Laser Distance Sensor 10m

The slag car material laser distance sensor 10m is a specialized industrial range sensor used to measure the height or level of material inside a slag car. U81 height laser sensor is commonly found in steel mills, foundries, and other heavy industries where molten slag or solid waste materials are transported.

Key Features:

1. Measurement Range: Up to 10 meters and suitable for large slag cars.

2. Accuracy: Typically ±1 mm depending on laser distance sensors conditions.

3. Response Time: Fast often <10 ms, ideal for real-time monitoring.

4. Environmental Resistance: IP54 laser distance sensor 10m, suitable for harsh industrial environments.

5. Output Signal: Digital output such as USB, UART, RS232, RS485 and Modbus.

6. Mounting: Designed for fixed installation above the slag car.

Applications:

1. Monitoring the fill level of slag in transport vehicles.

2. Preventing overloading or underloading.

3. Automating dumping or loading processes.

4. Integrating with PLCs or MCU systems for process control.

5. Ensuring safety and optimizing material handling efficiency.

Installation Considerations:

1. Mount the height laser sensor above the slag car, pointing downward at a slight angle to avoid interference from side walls.

2. Ensure a clear line with laser distance sensor 10m of sight to the material surface.

3. Avoid reflective surfaces or dust clouds that may interfere with laser distance sensors accuracy.

4. Use protective housing if dust or high heat is present.

If you’re looking to purchase or integrate this laser distance sensor 10m into your slag car system, ensure compatibility with your existing PLC/MCU control system, and consider consulting with Seakeda supplier for custom mounting or protection solutions.