Minimum Cylinder Drone Pod 1km Laser Distance Module

Designing a minimum cylinder drone pod with a 1km laser distance module involves several key components and considerations. Here’s the essential elements and steps to achieve this 1km laser rangefinder module:

Laser Rangefinder Module Specifications:

1. Type: Time-of-Flight (ToF Laser Distance Sensor)

2. Accuracy: High precision, typically ±0.5m to ±1m

3. Range: Chose a 1000m rangefinder module such as PTYC2-10X.

4. Example Models: PTYC2-10X, PTYS2-10X, PTYC-10X, PTYS-10X and TC22.

5. Form Factor: Minimum cylinder 17*37.2mm ,PTYC2-10X laser rangefinder sensor is compact and lightweight.

6. Functionality: Laser distance measurement sensor supports TTL-UART communication and data transmission .

7. Integration: 1km laser distance module could be mountable on a drone pod.

8. Power Consumption: Low power to ensure long battery life.

Assembly and Integration:

1. Mount the 1000m Laser Rangefinder Sensor: Secure the 1km laser rangefinder module inside the cylindrical housing, ensuring it is aligned with the front of the pod.

2. Connect Power and Data: Wire the UART laser rangefinder to the microcontroller and power supply. Ensure all connections are secure and well-insulated.

3. Install Communication Module: Mount the communication laser distance module and connect it to the microcontroller for data transmission.

4. Seal the Housing: Close the housing and ensure it is sealed properly. Add any necessary gaskets or seals to protect against environmental factors.

5. Attach to Drone: Use the mounting hardware to securely attach the pod to the drone. Ensure the pod is positioned to provide an unobstructed view for the mini laser rangefinder module.

Testing and Calibration:

1. Initial Testing: Test the drone laser distance module for accuracy and range. Ensure it provides reliable measurements up to 1 km.

2. Calibration: Calibrate the pod laser distance module and microcontroller to ensure accurate distance readings.

3. Flight Testing: Conduct test flights to verify the pod’s performance, including data transmission, power consumption, and overall functionality.

Software Development:

1. Firmware: Develop firmware for the microcontroller to control the 1km laser rangefinder sensor, process data, and handle communication.

2. User Interface: Create a user interface (UI) for the ground station or a mobile app to display and manage the laser sensor measure distance data.

Email: sales@seakeda.com

WeChat: 86-18302879423