12

Products

Industrial Laser Ranging Sensor RS232 Output

Short Description:

M92 series laser distance sensor was developed for fast and precise distance measuring, even in difficult measurement conditions, like Dust and fog, with poor reflect laser signal level. The laser sensor extremely small and lightweight make it suitable for size and weight limited applications, such as portable devices, industrial robot, medical system, etc.

Measuring Range: 0.03~40m

Accuracy: +/-1mm

Frequency: 3Hz

Communication Interface: RS232

For decades, Chengdu Seakada Technology Co., Ltd. has been an expert in the field of laser technology, optics, electronics, and mechanical systems that make up a laser rangefinder sensor. We are one of the leading manufacturers in this sector. Our products are put to successful applications around the world.

If you need more product details and data sheet, please contact us, click ” SEND EMAIL TO US “.

 


Product Detail

Product Tags

Product Introduction

M92 digital laser distance sensor is a high-precision distance measuring sensor with protection developed by our company. It has the characteristics of high measurement accuracy, fast measurement speed, and simple installation and operation. It has been widely used in various fields such as robotic arm protection measurement, industrial control and so on. The high range proximity sensor indoor 40m ranging range, ranging frequency is 3Hz, accuracy is 1mm, IP54 protection level, can be used in low temperature minus 10 ℃, needs to be customized. The light source of the distance ranging sensor is 635nm red light, class II laser grade, and can be used in material level and precise laser measuring and other occasions.

Features

1.Small size, light weight and high precision
2. The principle of phase method, suitable for indoor and outdoor models
3. Industrial grade, mm error

High Precision Laser Distance Sensor
Laser Rangefinder Sensor

Parameters

Model M92-40
Measuring Range 0.03~40m
Measuring Accuracy ±1mm
Laser Grade Class 2
Laser Type 620~690nm,<1mW
Working Voltage 5~32V
Measuring Time 0.4~4s
Frequency 3Hz
Size 69*40*16mm
Weight 40g
Communication Mode Serial Communication, UART
Interface RS232(TTL/USB/RS485/ Bluetooth can be customized)
Working Temperature 0~40℃(Wide temperature -10 ℃ ~ 50 ℃ can be customized)
Storage Temperature -25℃-~60℃

Note:

1. Under bad measure condition, like environment with strong light or the diffuse reflectance of measuring point over-high or low, the accuracy would have bigger amount of error: ±1 mm± 50PPM.
2. Under strong light or bad diffuse reflectance of target, please use a reflection board
3. Operating temperature -10 ℃~50 ℃ can be customized
4. 60m to choose from

Application

1. Road traffic
2. Automotive anti-collision
3. Construction survey and design
4. Levelmaterial level detection
5. Robot arm control
6. Fixed length control of container crane spreader
7. Security monitoring

FAQ

1. Does the distance sensor work outdoors?
Yes, it does, but its measuring range and accuracy could be affected by the environment like the target surface, strong sunlight etc.

2. Is the range finder sensor compatible with Arduino?
Yes, Seakada laser distance sensor was already widely used in many applications, including Arduino, Raspberry pie, MCU etc.

3.What are the principles of Seakada laser distance sensors?
Seakada laser accurate distance measurement sensor based on the principles of phase, time of flight, pulse ranging.We will provide model selection suggestions based on your project needs.


  • Previous:
  • Next: